Chantier Irrigal

Search product

Needle Valves

Valves and hydrants

Needle valves manufactured by Saint-Gobain PAM are designed to modulate water flow rates and elevated differential pressures.

Control water flow rate and pressure

PN 10PN 16PN 25
DN 100 - 1000DN 100 - 1400DN 100 - 900

The main characteristic of a needle valve is the capacity to modulate water flow rate and elevated differential pressures. The needle valve is able to do a linear maneuver also in a presence of relevant partialization degree although high inlet pressure and big exercise difference of pressure. The needle valve controls the water flow rate through the axial movement of a shutter operated by a connecting rod and crank mechanism.

The inlet flow rate is channeled into a round section passage which gradually decreasing and then increasing from the intake to the sealing seat. The internal profile of the valve is designed to optimize the hydrodynamic profile in order to:

  • have low head losses with valve completely open
  • minimize cavitation phenomena for important differences between inlet and outlet pressures of the valves.

In this case, the valve can be equipped with a special stainless steel cylinder for hydraulic loads dissipation.

Electric command

The valve is equipped with a manual command but also has the possibility to be actuated by an electrical device. It allows the valve to be used in combination with a control system to realize multiple functions. Electric actuators feature a position indicator and a manual emergency handwheel.


modulate water flow rate, needle valve
Manual version
needle valve, electric actuator
Motorized version

See also

Valve products for water distribution pipeline
Butterfly valve isolating device